欧洲进口工业设备
五金工具建材
机械
仪器仪表
药物测试安全表校准器组合式测试设备控制系统硬度计热交换器扫描器沾污仪紫光源混合器万用表百分表风速仪分度盘放大器六分仪热像仪拐档表数显表检测仪木材测湿仪电子秤静电消除器真空计压力表进样器移液器剩磁探测测试仪摆动缸滤芯测力计联轴器温控器平衡器混合机试验机打标机气压张力能量计译码器报警器读码器测距仪定位器荧光仪编码器注射器打印机液位计折光仪流量计感应机探测器检测器超声波发生器湿度计传感器烘烤设备检漏仪制冷机辐射测温传输探头光谱仪射线干燥器发射器指南针印刷设备操作面板显示器粘度计量块调节器采样记录仪油位计料位计冷却分析温度计压差测量发生器压力电子电工
泵阀仪表
压力开关
实验室设备
| 德国IDEAL闪光对焊机 BAS 040 |
| 点击次数：1271 更新时间：2021-07-05 |
德国IDEAL闪光对焊机 BAS 040
产品说明： 德国IDEAL Bandsaw Flash Butt Welder te BAS 040 BAS040型IDEAL闪光对焊机
for flash butt welding of 闪光对焊的适用范围：
Metal bandsaws (bi-metal, carbon steel bandsaws, tungsten bandsaws) 3 - 27 mm 金属带（双金属，碳钢带锯，钨合金带锯） Meat and fish bandsaws(stainless steel) 5 - 20 mm 肉和鱼带锯刀片（不锈钢） Wood bandsaw 5 - 40 mm 木头带锯刀片 Band knives 5 - 20 mm 带形刀 (The above mentioned dimensions refer to a minimum strip thickness of 0,4 mm) （以上尺寸所涉小厚度为0.4毫米及以上。） Capacity of transformer at 50 % duty cycle 3,5 kVA 变压器额定容量（50%负载）
Machine description: 机器说明： Machine case made out of welded steel sheet with vertical cast iron face plate – high precision guide of the movable jaw – automatic control of the flashing cycle by the gear unit drive with notches – upsetting by means of a pile of cup springs – wide distance of jaws for annealing adjustable with lever – adjustment of weld current in 4 steps – electronic controlled annealing device for infinite adjustment of the anneal voltage – clamping device with manual levers suitable for band tools upto 40 mm width 机壳由焊接钢板和垂直铸铁面板组成－移动颚的导向－由齿轮传动装置档电弧周期自动控制；焊端顶紧由一束盘型弹簧实现－用于退火的颚宽用杠杆调节－焊接电流4级可调－电子控制退火装置无限调节退火电压－带手动杠杆的夹紧装置满足40毫米宽的带具；
IDEAL Square Cutter te AHE 050 AHE050型带锯直角切割器 for separate mounting to work table to produce burr-free, square cuts at bandsaw blades up to a width of 50 mm 单独固定在工作台上；带宽达50 mm带锯刀片的刺直角切割；
IDEAL Special Grinding Machine te SMH 060 SMH060型磨边机 for removing the weld burr - Grinder as separate unit to be mounted to customer work table - machine made for maximum band width of 60 mm - manual clamping device for band with weld joint - grinding by 3 phase motor and continously adjustable grinding wheel
去除焊疤－作为单独装置固定在用户的工作台上；适合带宽60 mm；
工作原理: Working Principle:
The working principle of the imported welder: the working metal piece to be welded is pressed between two electrodes, when the power is on, the energe(current) generates, and flows through the work piece contact surface and the adjacent zone, resulting in resistant thermal effects which heat the work piece into molten or plastic state, thus plays the function of welding the metal.
本次的焊接机的工作原理为：是将被焊（金属）工件压紧于两电电子之间，通电后产生的能量（电流），利用电流流经工件接触面及邻近区域产生的电阻热效应将其加热到熔化或塑性状态，从而起到焊接金属的功能。
|
18804209403
首 页